Knowledgebase Home | Glossary | Favorites | Login Knowledgebase Home | Glossary | Favorites | Login
Search the Knowledgebase Browse by Category
My camera keeps losing its IP when I disconnect it and reconnect in another location.
Article Details

Last Updated
19th of March, 2012

Any modifications to the camera's IP address through the onboard web interface require the settings to be committed to flash memory. This can be done under the System or Administration tabs of the web interface by clicking Save All or Save all settings to flash. Without doing this step, the changes will only be temporary until the camera is power cycled at which point it will revert back to previously saved settings.

Related Articles
Attachments
No attachments were found.

Continue